DELLOK Stainless Waste Heat Recovery Unit A192 Square Fin Tube

A192 SMLS Carbon Steel , H Fin Bolier Tubes of Waste Heat Recovery Unit

Description:

Acceptance Criteria
Approved drawing and the delivery conditions (TDC) of clients.

Additional Services
Tube swaging, elbows, bends(90° / 180° or as per client's design).

Quality Tests
The Square or Rectangualr H Finned Tube quality is assured by hydrostatic or pneumatic tests, eddy current tests and tensile tests in order to verify the mechanical bonding between inner tubes and outer fins.

Surface Coating
Outside-Red oxide zinc phosphate primer and inside volatile corrosion inhibitor (VCI) in water soluble tablet form.

Delivery Condition: Tube ends are square cut, free burrs, internally dried and air blown clean, externally coated with varnish at both ends of Square or Rectangualr Fin Tube.

Applications:

1. Economizers ,

2. Heat exchangers

3. Marine boilers

Competitive Advantage:

1. We have more than 10,000 square meters workshop, including 6 H-FIN TYPE finning machines, daily extrusion capacity up to 20 tons.

2. The Square or Rectangular Fins H-Finned Tubes are the preferred tube choice for high pressure boilers.

3. Fins can be manufactured by stamping process in almost any shape and size.

4. In-line fin and tube spacing allows for cleaning with excellent choice in sooting or fouling atmospheres.

5. Fin height and spacing are limited only by heat transfer considerations.

6. Fins and tubing can be similar or dissimilar metals.